Laboratory Drying Ovens
Series TM1100 consists of five different cabinets with sizes from 24 litres up to 430 litres.There are two different types of controllers available. The Basic and the Special.Interior housing and shelves are in stainless steel. Externally, the cabinets are constructed of electrolytically galvanized steel sheets, coated with a grey epoxy polyester paint (RAL 7035).The three smallest models are table models that are stackable. They can be wall mounted using brackers. The two biggest models stand on the floor and have adjustable feet.
 |
 |
Literature | |
Call 01865 307240 for sales advice |
- Temperature range up to 250 ˚C
- PID Temperature controller
- Digital calibration
- Alarm
- Timer
- Datalogging
- Safety thermostat
- 4 speed fan
| Temperature Control | TM1101 | TM1102 | TM1103 | TM1104 | TM1105 | |
|---|---|---|---|---|---|---|
| Variation | + / - ˚C | 1 |
1 |
1 | 1 | 1 |
| Deviation (Spatial) | + / - % | 1,5 |
1,5 |
1,5 | 1,5 | 1,5 |
| Readability / Set ability | ˚C | 1/0,1 |
1/0,1 |
1/0,1 | 1/0,1 | 1/0,1 |
| Range | ˚C | tb-200** |
tb-200** | tb-200** | tb-200** | tb-200** |
| Sensor thermocouple "K" | * |
* | * | * | * | |
| Controller | PID |
PID | PID | PID | PID | |
| Display | LED/LCD |
LED/LCD | LED/LCD | LED/LCD | LED/LCD | |
| Shelves | TM1101 | TM1102 | TM1103 | TM1104 | TM1105 | |
|---|---|---|---|---|---|---|
| Standard / Max | pcs | 2/7 |
2/8 |
4/16 |
3/13 |
4/23 |
| Dimensions WxD | mm | 320x240 |
400x330 | 510x410 |
600x550 | 600x550 |
| Max load pr shelf | kg | 20 |
20 |
20 |
30 |
50 |
| Permitted total load | kg | 50 |
50 |
70 |
80 |
100 |
| Heating | TM1101 | TM1102 | TM1103 | TM1104 | TM1105 | |
|---|---|---|---|---|---|---|
| Heating up time to 37°C | mins | 40 |
50 |
65 |
20 |
20 |
| Heat Transfer at 70°C | W | 400 |
460 |
710 |
1300 |
1500 |
| Air Changes | p/h | 110 |
50 |
20 |
95 |
60 |
| Dimensions | TM1101 | TM1102 | TM1103 | TM1104 | TM1105 | |
|---|---|---|---|---|---|---|
| Exterior WxDxH | mm | 515x455x490 |
595x550x580 |
705x625x820 |
830x730x1170 |
830x730x1620 |
| Interior WxDxH | mm | 325x270x270 |
405x380x360 |
515x440x600 |
602x605x730 |
602x605x1190 |
| Volume | litres | 24 |
56 |
136 |
265 |
430 |
The above cabinets are available in 2 versions :
- Basic (/B) Control Panel
- Special (S) Control Panel
Basic (/B) Control Panel
The basic TS 8000 is recommended when operating with the same temperature throughout the whole process, and when a written report is not needed.
Temperature Controller
The controller is very easy to operate and has a large, green display. It has a number of functions, such as adjustable alarm limits, acoustic alarm, data logging, timer, 4 fan speeds and PID control of the temperature. The controller has passed the tests for the highest class of EMC requirement for the heavy industry (EN 50081-1 and EN 50082-1),tested by NEMCO EMC-Iab.
Calibration
Digital calibration of temperature is easily operated by entering new constants from the keyboard into the microprocessor
Alarm
The controller is equipped with both flashing and acoustic alarm. Alarm limits can be set both below and above the set temperature.
Timer
The timer starts only when the set temperature is reached. It can also be programmed with a delayed start option. There is an acoustic end-of-cycle warning.
Data Logging
The controller records maximum and minimum temperatures, and the average temperature is also calculated. This is an useful aid in evaluating the temperature accuracy. The recording starts after the initial stabilisation.
SAFETY
All models are designed to satisfy the requirements of the international standard IEC 1010-1
The power inlets are fused. All cabinets are equipped with a separate electronic safety thermostat, class 3.1, that takes over the temperature control in the case of a controller failure.
In addition, all drying ovens, sterilizers (models TM1101 to TM1105) are equipped with an extra thermostat that cuts the power to the heater if the temperature should rise above the maximum working temperature of the cabinet.
Ventilation
All models in this series are equipped with a ventilator fan that can be regulated at 4 different speeds. The air valve is infinitely variable.
Special (/S) Control Panel
When more accurate regulation is required, and if different temperatures are to be programmed,choose the “Special” control panel”.
In addition to the features described for basic control panel the “special” version has the following
Temperature Controller
Ten speed fan (Basic controller has 4)
Automatic Safety Thermostat
A safety thermostat system is integrated in the electronic control system. The safety thermostat
is automatically set whenever a new temperature is set.
RS232 Port
Fitted with an RS232 to allow connection to a printer or computer
The date, time, and temperature can be printed at an adjustable time rate, down to one minute.
Events, such as new settings and alarm conditions can also be printed. By using a PC instead
of a printer, remote settings and monitoring are possible.
Real Time Program OPTIONAL(with “Special” control panel only)
The program system can handle up to twenty settings of temperature. A setting is made active
when the real time matches the time connected to a particular setting. The changes can be done
a number of times every day, a specific day in the week, or a specific week in the year, or a combination of all.The temperature can be ramped towards a newsetting in a defined rate. The system can be automatically adjusted for European Daylight Saving Time, DST.
Specification
An important part of our sales process is to ensure that you get the right instrument for your application. Click "Enquire" below and one of our technical specialists will contact you to discuss your application. |
