Cooled Incubators

Series TM1300 consists of three different cabinets in two different sizes. The KB 8400L is equipped with programmable light.These cabinets have been developed to meet the needs of reliability,
accurate and safe control over the entire temperature range and low power consumption.

To achieve those goals, the latest technology available in cooling, temperature control and insulation is used. Interior housing and shelves are in stainless steel. Externally, the cabinets are constructed of electrolytically galvanized steel sheets, coated with a grey epoxy polyester paint (RAL 7035).
cooled incubator
pdf icon  Literature  
 Call 01865 307240 for sales advice
  • Temperature range from -9,9 ˚C to
  • +70 ˚C (KB 8400L -2 ˚C to +70 ˚C)
  • Accurate control over the entire
  • temperature range
  • Automatic safety thermostat
  • settings
  • Low power consumption
  • Temperature /light programming
  • in real time *
  • Printer reporting *
  • Air jacket
  • PID Temperature controller
  • Digital Calibration
  • Alarm
  • Timer
  • Data logging

Real Time Programming (optional)

The program system can handle up to twenty settings of temperature and light. A setting is made
active when the real time matches the time connected to a particular setting. The changes can be
done a number of times every day, on a specific day of the week, or on a specific week in the year, or
a combination of all of them. In addition, the settings can be ramped towards the new setting at a
defined rate. The system can be automatically adjusted for European Daylight Saving Time, DST.

Printer report (optional)

An optional thermal printer (SEIKO OPU-414) can be connected to the serial data port on the cabinet.
The date, time, temperature and humidity can be printed at an adjustable time rate, down to one
minute.Events, such as new settings and alarm conditions can also be printed.This can be a useful aid in
documentation of a test cycle.By using a PC instead of a printer, remote settings and monitoring are possible.

Custom Specials and Upgrades

The system software can easily be replaced via a Windows based PC connected to the serial port.
This makes it possible to keep the system up to date. Customers with special functional needs, can
get their software on a CD or via the Internet from Lab-Pro.
Temperature Control           TM1301 TM1302 TM1303
Variation + / - ˚C 0,1 0,1
 0,1
Deviation (Spatial) + / - % 0,2 0,2
 0,2
Readability / Set ability ˚C 0,2
 0,1
 0,1
Range ˚C -9,9-70,0
 -9,9-70,0
 -2-70,0
Sensor thermocouple "K" Yes
 Yes
 Yes
Controller PID
 PID
 PID
Display LCD
 LCD
 LCD
Shelves        TM1301 TM1302 TM1303
Standard / Max pcs 3/14
 3/22
 3/22
Dimensions WxD mm 500x450
 610x580
 610x580
Max load pr shelf kg 20
 30
 30
Permitted total load  kg 80
 120
 120
Dimensions        TM1301 TM1302 TM1303
Exterior WxDxH  mm 680x580x1430
830x720x1840
 960x720x1840
Interior WxDxH mm 520x451x777
 630x592x1073
 630x592x1073
Air changes litres 182
 400
 400

Specification

An important part of our sales process is to ensure that you get the right instrument for your application.  Click "Enquire" below and one of our technical specialists will contact you to discuss your application. 
Enquire